Ball Bearing

Approx. Rs 280 / PieceGet Latest Price

Product BrochureProduct Details:

These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.

Approx. Rs 5,000 / PieceGet Latest Price

Product BrochureProduct Details:

Radial spherical plain bearing, requiring maintenance, sealed, metric sizesRadial spherical plain bearings are designed to accommodate radial and combined radial and axial loads, and also misalignment. This specific design includes a steel/steel sliding contact surface combination and a double-lip contact seal on both sides. The bearings require maintenance and can be relubricated via lubrication holes and an annular groove in both rings.

• Designed for radial and combined radial and axial loads
• Long service life
• Minimal maintenance
• Suitable for heavy static, alternating or impact loads

Approx. Rs 30,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 50,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with tapered bore and relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 52,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 41,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 57,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 450 / PieceGet Latest Price

Product BrochureProduct Details:

These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction.

Approx. Rs 55,000 / PieceGet Latest Price

Product BrochureProduct Details:

Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.

• Accommodate misalignment
• High load carrying capacity
• Relubrication features
• Low friction and long service life
• Increased wear resistance

Approx. Rs 1,500 / PieceGet Latest Price

Product BrochureProduct Details:

A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.

The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.

Approx. Rs 17,000 / PieceGet Latest Price

Product BrochureProduct Details:

We are the manufacturer and exporter of Volvo Bearings for Bus & Truck wheel Hub Bearings for IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

We provide advanced VOLVO Bearings that are capable of carrying combination of large thrust and radial loads. These are relatively large sliding friction generated at this flange, which makes it suitable for high speed applications. Applied majorly in trucks, we develop them with extra sturdiness, heat resistance and load capacity. We design VOLVO Bearings for various trucks & bus.

The Volvo Truck Bearing is used for flawless component rotation, reducing the friction between moving parts. Best grade material and sophisticated techniques are being employed in developing these bearings to ensure high load enduring capacity. This product range is capable of bearing heavy loads with proper alignment. 

Approx. Rs 9,000 / PieceGet Latest Price

Product BrochureProduct Details:

We are the manufacturer and exporter of Volvo Bearings for Bus & Truck wheel Hub Bearings for IVECO Truck Bearings, DAF Truck bearings, Renault Truck Bearings, Scania Truck bearings, SAF Truck Bearings, Volvo Truck Bearings, Mercedes Benz truck bearings, truck wheel hub bearing, bearing set without spacer, bearing set with spacer, and tapered roller bearing.

Approx. Rs 12,000 / PieceGet Latest Price

Product BrochureProduct Details:

INSOCOAT single row deep groove ball bearings feature an electrically insulating coating on the outside surfaces of either the inner or outer bearing ring. This keeps stray electric currents from passing through the bearings, protecting them against electrical erosion damage and helping prevent lubricant degradation resulting from electric current discharge. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.

Approx. Rs 900 / PieceGet Latest Price

Product BrochureProduct Details:

The SKF EasyPull TMMA 100H is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 100H is hydraulically assisted and effortless reaches withdrawl forces up to 100 kN for components with a maximum outer diameter of 250 mm (9.8 in).